Why do we need to detect chlorophyll in water bodies?
The level of chlorophyll concentration represents the concentration of algae in the water body. The concentration of algae can reflect the degree of eutrophication of the water body, that is, the degree of water pollution. Therefore, the level of chlorophyll is an important indicator of the water environment. Therefore, water quality monitor equipment that detects chlorophyll is needed to detect chlorophyll content. Chlorophyll is closely related to the ammonia nitrogen, total nitrogen, total phosphorus, pH, and total organic carbon of the water solution. In freshwater, cyanobacteria, especially Microcystis, are the main indicator species for eutrophication. The outbreak indicated that the degree of eutrophication of the water body was quite serious (excessive fertilizer and water).
In our country, due to the rapid economic development in recent decades and the excessive development and utilization of lake resources. A large amount of nitrogen and phosphorus nutrients are discharged into the lake along with industrial wastewater and domestic sewage. Lead to excess nutrients and eutrophication in the lake. Jingxun Changtong’s chlorophyll optical sensor can perform sewage monitoring. Effectively monitor the content of chlorophyll and blue-green algae in the water body.
Jingxun Changtong Chlorophyll Sensor is the standard industrial water quality monitor equipment for detecting chlorophyll concentration. It has the advantages of high precision, good stability and convenient use. The chlorophyll sensor has a sturdy structure. The sensor has stable performance and can be used online for a long time. No maintenance and frequent calibration are required. It can be used in rivers, lakes, ponds, marine surveys, aquaculture, drinking water sources, algae and phytoplankton and other occasions where chlorophyll needs to be determined.
Pay attention to the correct connection of the wires. Wrong wiring will cause the equipment to burn out.
The sensor should avoid contact with organic solvents, paint, oil, alcohol and high-concentration gases, including silica gel and other adhesives.
By default, the factory provides 4.8 meters of wires. Customers can customize the length of the extension cord.
There is no yellow line in the production line sequence that may be provided in some factory batches. At this time, the gray line can replace the yellow line.