Background:
An wind speed sensor is a device used to measure wind speed. Compact and light in shape, easy to carry and assemble.
According to the working principle, it can be roughly divided into mechanical anemometer and ultrasonic anemometer.
The shell is made of high quality aluminum alloy profile or polycarbonate composite material.
Rain proof, corrosion resistant, anti aging. It is a convenient, safe and reliable intelligent instrument.
Mainly used in meteorology, agriculture, shipping and other fields, can be used outdoors for a long time.
The application of anemometer is very extensive, according to the actual needs of the site to choose different signal output of the wind speed sensor.
Wind speed sensor can be widely used in greenhouse, environmental protection, meteorology, breeding, tuyere and other industries.
Two prohibitions:
1、Do not use anemometer in combustible gas environment.
2、It is forbidden to put the probe of the wind speed sensor in combustible gas.
Seven don’t:
1, do not remove or modify the anemometer;
2, do not expose the probe and anemometer body to rain storage (can be used outdoors);
3, do not touch the sensor inside the probe;
4, do not place the anemometer in the place of high temperature, high humidity, dust and direct sunlight;
5, do not use volatile liquid to wipe the wind speed sensor;
6, do not fall or weight wind speed sensor;
7、Do not touch the sensor part of the probe when the anemometer is live.
Three musts:
Be sure to use the anemometer correctly according to the instructions.
In case of abnormal smell, sound or smoke from the anemometer, or liquid flowing into the anemometer, shut down the battery immediately.
When the wind speed sensor is not used for a long time, take out the internal battery.
1、Assemble the wind direction sensor after taking it out of the packing box. Note that the wind pole is inserted in the direction of the arrow.
The weight of the vane before and after the balance should be adjusted, and the two wings should be in the same plane with the axis of rotation; The North Pole and the north line shall be in the same direction.
2、The sensor assembly is composed of anemometer, wind direction sensor and sensor bracket.
When assembling, the sensors should be connected to their plug-ins respectively, and then set on the bracket sleeve, and tighten the screws.
3、the sensor working voltage is usually dc 5 VOLTS, due to the built-in lightning protection device, the actual working voltage shall not be higher than 6 volts.