Soil pH sensor refers to the pH of the soil. The range is 0~14. If the pH is equal to 7. It is neutral, <7 is acidic，> 7 is alkaline. The pH value of the soil affects the soil nutrients nitrogen, phosphorus and potassium. Therefore, it has an important impact on the healthy growth of plants. Soil pH sensor is also called soil pH sensor and soil pH detector. It is an instrument for real-time detection of soil pH. It is composed of a combination of a metal sensor and a functional value switching device. The soil PH sensor probe is inserted into the soil to utilize the current generated by the oxidation-reduction reaction in the chemical reaction. The magnitude of the current value corresponds to different unit data.
1. When testing, insert the tip of the metal probe into the soft soil.
2. If the soil is too hard, a small hole slightly smaller than the probe needs to be drilled in advance. Do not insert forcibly, nor hit the back of the sensor with a hard object.
3. When pulling out the soil after use, you need to hold the black shell to pull it out instead of directly pulling out the communication line, and wipe the probe clean in time, and cover the protective cover to avoid damage to the metal film.
4. The soil pH sensor is professionally used to measure the pH value of the soil. It cannot be measured with strong acid and alkali solutions in the laboratory.
1. Quick measurement method: select the land to be measured, and throw the surface soil to the depth that needs to be measured. Avoid hard objects such as soil and rock, and insert the probe vertically into the soil. When using this method to measure the pH of the soil. It is necessary to make multiple measurements at different locations on the tested land. Calculate the average value.
2. Buried measurement method: first dig a deep pit with a diameter> 20cm, insert the probe horizontally into the pit wall to a predetermined depth, and then fill the pit. After a period of stabilization, the pH value of the soil can be measured.